Aluminium leaf (sometimes called imitation silver leaf) is a metal leaf made from pure aluminium leaf that has been hammered into incredibly fine sheets for use in gilding. This metal leaf is manufactured in Italy to the highest standards.
This product is supplied as transfer (or patent) leaf in booklets of 25; each leaf in the book has been pressed firmly to specially treated tissue paper that is separated by sheets of rouge paper. The leaf will stay adhered to it's backing paper when removed from the book making it suitable for outdoor work or any other situation where loose leaf would be unmanageable or at risk of blowing away. To apply the leaf it is pressed to the sized surface face down before peeling away the backing paper to leave the leaf on the surface. Transfer leaf is best suited for gilding flat areas.
These booklets contain smaller leaves that are cut to the size of a standard silver leaf, rather than aluminium leaf. These smaller silver leaves make for an excellent alternative to pure silver leaf for an application where silver cannot be used.
This product is supplied as transfer (or patent) leaf in booklets of 25 leaves, each leaf in the book has been pressed firmly to specially treated tissue paper that is then separated by sheets of rouge paper. The leaf will stay adhered to it's backing paper when removed from the book making it suitable for gilding onto flat surfaces or any other situation where loose leaf would be unmanageable or at risk of blowing away. To apply the leaf it is pressed face down onto the sized surface before rubbing over the back of the tissue to release the leaf onto the surface and then peeling away the backing paper to leave the leaf on the surface. Transfer leaf is best suited for gilding walls and ceilings and flat areas of frames and furniture.
Aluminium leaf is non-tarnishing and will only require protection if the leaf is to be used outdoors or if the gilding is to be touched or handled regularly.
Size: 95 x 95mm
Each booklet contains 25 leaves
