Finesse Pinstriping Tape - F11

Finesse Pinstriping Tape is a revolutionary vinyl tape designed with pre-cut lines to act as a precise stencil, making it an essential tool for professional and DIY detailing. Whether you're working on cars, boats, signs, machinery, or other surfaces, this tape ensures flawless, sharp pinstripes with ease. Each roll is 42 feet long, providing plenty of material for even the most intricate designs.
The tape's innovative design allows for smooth application on curved or flat surfaces, while the pre-cut lines make masking and painting hassle-free. Once painted over, the tape creates crisp, clean lines—dark for the painted areas and white for the masked-off sections—ensuring stunning, professional-grade results every time.
Finesse Pinstriping Tape is perfect for achieving precision and creativity in your detailing projects. Bring your designs to life—order your roll of Finesse Pinstriping Tape today and transform your projects with ease and accuracy!

INSTRUCTIONS

1. Press down a couple of inches of stencil tape firmly, at one end of the car, then let the roll unwind slowly in your hand as you pull it toward the other end, applying slight tension to the tape (hold the roll of tape away form the surface). Then following the styling lines of the car, lower the stencil tape to the surface. Afterward, pat the stencil tape down with your hand so the tape will not shift when you smooth it down with your thumb.
2. To make bends, the stencil tape must be stretched as the bend is being made. Hold the roll in one hand while pressing the stencil tape down with the thumb of the other hand; stretch the stencil tape as you make the bend.
3. Remove transparent carrier tape from the tan stencil strips by stretching or deforming at one end (widthways). Once separate, peel off transparent tape by pulling it back over itself (not at a right angle). Note: to make this easier, leave couple of extra inches of stencil tape hanging off the end of the car when first applying stencil tape.
4. To make end points, cut the centre strip of the stencil tape to form a spear point, then join the outer strips to form another spear point (This method is for double-stripe stencils).

Important: If tan stencil strips appear to be on the wrong side of the transparent tape, it is because it was unwound incorrectly. To remedy this, simply unwind only the tan stencil strips once around the roll.