Liberon Liquid Beeswax is a traditional wax that is ideal for nourishing absorbent woods such as pine and oak, especially unsealed and is suitable for use on both hardwoods and softwoods. It feeds the wood and protects it against dryness while giving it an authentic finish. It is particularly suitable for large and very dry surfaces such as beams, floors, doors and staircases. It is suitable for interior use only.
Preparation
Remove old waxes and dirt with Liberon Wax and Polish Remover if necessary. Ensure the surface is clean, dry and free from dust.
Application
Shake well before use. Apply Liberon Liquid Beeswax with a cloth, brush or spray gun. Allow to become touch dry for a minimum of 1 hour - longer if possible, then buff with a clean cotton cloth, or for a faster finish with a Liberon Drill Brush. Repeat the operation on new or very dry wood as it may require two or more coats. For a better quality finish apply thin coats of wax and build-up to the desired level of sheen, buffing between coats.
Cleaning and maintenance
Wipe over with a cloth or duster and re-wax as required. Do not wash with water.
Precautions
Not suitable for high water areas such as kitchens and bathrooms.
In cold weather wax may thicken. To soften remove cap and stand in a bowl of hot water for 5 minutes, replace the cap and shake. Repeat if necessary.
Coverage
10-12m2 per litre
Drying time
1 hour minimum
